Friday, October 17, 2025

Cessna 172F Skyhawk, N8219U, fatal accident occurred on September 26, 2025, at Goheen Airport (W52), Battle Ground, Washington

  • Location: Battle Ground, WA 
  • Accident Number: WPR25FA294 
  • Date & Time: September 26, 2025, 13:06 Local 
  • Registration: N8219U 
  • Aircraft: Cessna 172F 
  • Injuries: 1 Fatal 
  • Flight Conducted Under: Part 91: General aviation - Personal

https://data.ntsb.gov/carol-repgen/api/Aviation/ReportMain/GenerateNewestReport/201729/pdf

https://registry.faa.gov/AircraftInquiry/Search/NNumberResult?nNumberTxt=N8219U

On September 26, 2025, about 1306, Pacific daylight time a Cessna 172F, N8219U, was destroyed when it was involved in an accident near Battle Ground, Washington. The pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

Preliminary ADS-B data (see figure 1) indicated that after departure from Southwest Regional Airport, Kelso, Washington (KLS), the airplane flew southeast along the Columbia River to Goheen Airport, Battle Ground, Washington (W52) which is at a field elevation of 292 ft mean sea level (msl). ADS-B data showed that the airplane approached W52 from the northeast at an altitude of 1,800 ft msl on an approximate 45° angle to the runway. At 1300:30, as the airplane was about 700 ft east of the approach end of runway 15, a left turn was initiated to a southerly heading, parallel to the runway, at an altitude of about 800 ft msl. The airplane’s flight track remained parallel to the runway until a left turn was initiated to the crosswind leg of the airport traffic pattern at 1300:55.

The airplane continued a left turn to the downwind leg of the airport traffic pattern and climbed to 1,400 ft msl, before it began a descending left turn to the base leg of the traffic pattern at about 1302:05. The airplane continued the descending left turn, onto final for runway 15. ADSB contact was lost at 1303:27, as the airplane was about 300 ft msl, and 642 north of the approach end of runway 15. Video surveillance footage showed the airplane cross the runway threshold about 10 ft above ground level, perform a touch and go on the last 1/3rd of the runway at 1303:43. The video showed that after touchdown, the airplane began a shallow climb.

ADS-B contact was reestablished at 1304:09, when the airplane was about 2,000 ft southeast of the departure end of runway 15, at an altitude of about 200 ft msl. The airplane remained at 200 ft throughout the turn from crosswind to the downwind leg of the airport traffic pattern. 

ADS-B data showed that at 1304:44, the airplane’s altitude was 600 ft msl, abeam the approach end of runway 15, on the downwind leg. The airplane continued to climb to 900 ft msl, and initiated a left turn, onto the base leg, and continued to the west, past the extended runway centerline at 1305:36, while maintaining an altitude of 900 ft msl. At 1304:42, the airplane began a descending left turn, to a heading about 15° left of runway heading. The last recorded ADS-B data point was at 1306:12, at an altitude of about 300 ft msl, and about 122 ft northwest of the approach end of runway 15. 


A witness that was situated midfield on the east side of the runway reported that the airplane sounded normal, like it was making full power. She saw the airplane conduct a touch and go landing, then depart while it remained within the traffic pattern. She could hear the airplane on the downwind leg of the traffic pattern and noted that while it was on final, it was coming in fast. Instead of landing, the airplane banked right and impacted trees.

Examination of the accident site revealed that the initial point of impact (IPOI) was identified by witness marks on a large tree about 75 ft above the base (see figure 2). Below the IPOI, was a 4 ft section of the outboard right wing, aileron, and wing tip that came to rest on the ground near the base of the tree. The outboard section of the right wing showed a concave depression consistent with the shape and diameter of the IPOI. Aileron control cables were entangled with the tree branches. The propeller was separated from the crankshaft and came to rest about 22 ft southwest of the IOPC. The propeller blades exhibited S-bending, leading edge polishing, and embedded wood fibers. 

The main wreckage came to rest inverted, about 138 ft south of the IPOI and consisted of the inboard right wing and flap, the entire left wing, empennage, cabin, and engine (see figure 2). The cabin and cockpit section sustained thermal damage, that consumed both inboard wings and extended from the engine compartment to the baggage compartment where the auxiliary fuel cell was located. Flight control continuity was established from the cockpit controls to all primary flight control surfaces.

The wreckage was recovered to a secure location for further examination.

Beechcraft A35 Bonanza, N577B, fatal accident occurred on October 7, 2025, near Beeville Municipal Airport (BEA/KBEA), Beeville, Texas

  • Location: Skidmore, TX 
  • Accident Number: CEN26FA012 
  • Date & Time: October 7, 2025, 12:23 Local 
  • Registration: N577B 
  • Aircraft: Beech A35 
  • Injuries: 1 Fatal 
  • Flight Conducted Under: Part 91: General aviation - Personal

https://data.ntsb.gov/carol-repgen/api/Aviation/ReportMain/GenerateNewestReport/201811/pdf

https://registry.faa.gov/AircraftInquiry/Search/NNumberResult?nNumberTxt=N577B

On October 7, 2025, at 1223 central daylight time, a Beech A35 airplane, N577B, was destroyed when it was involved in an accident near Skidmore, Texas. The pilot was fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations (CFR) Part 91 personal flight.

A property owner located near the accident site provided a doorbell camera video recording of the airplane as it descended toward the terrain. The recording showed the airplane for a short time which included audio sounds. When the airplane came into the camera view, it was descending from left to right in the frame. The airplane appeared to be intact in the video recording, and the engine could be heard operating.

The pilot held a private pilot certificate for single engine land airplanes and did not have an instrument rating.

Preliminary ADS-B data indicated that the airplane departed from runway 12 at the Beeville Municipal Airport at 1219. After takeoff, the airplane climbed to about 1,600 ft. msl and then entered a descending right turn which continued to the accident site. The final ADS-B location, at 1223, was about 600 ft. east of the initial impact point. (see figure 1).

Responding law enforcement officers reported that about the time of the accident, numerous vehicle accidents occurred on nearby roadways due to reduced visibility from heavy rain and storm activity.

The airplane wreckage was distributed along a path oriented about 280°. The main wreckage was located about 500 ft from the initial impact location, and the engine was located about 1,200 ft. from the initial impact location. The main wreckage consisted of the fuselage from the firewall to the empennage surfaces and the left wing of the airplane. The right wing was fragmented with pieces of the right wing located between the initial impact location and the main wreckage. Portions of the right-wing flight control surfaces were also located between the initial impact location and the main wreckage. The left wing was separated from the fuselage but came to rest underneath the fuselage. The wing was continuous from root to tip and the flap and aileron remained attached. The forward fuselage was crushed, and the fuselage was separated just aft of the baggage compartment bulkhead. The aft fuselage was bent forward of the empennage surfaces.

Flight control cable continuity was verified from the empennage and forward to the cockpit controls with no breaks in the control cables. The aileron control system cables were intact. The right-wing aileron control bellcrank had breaks at both bellcrank arms that connected to the control cables. The broken portions of the bellcrank arms remained attached to the cable ends and the arm breaks were consistent with impact damage. The left-wing aileron control bellcrank had a break at one of the bellcrank arms that connected to the control cable. The unbroken arm was still attached to its respective cable. The portion of the broken arm remained attached to the cable end, and the arm break was consistent with impact damage. No defects relating to the primary flight control system were observed during the on-scene examination.

The engine separated from the airframe and was found about 1,200 ft. from the initial impact location. The propeller flange was separated, and the accessory case was fractured. The induction system and exhaust system were separated from the engine. The engine was able to be manually rotated by using a pry bar on the exposed camshaft gear. The rotational speed that could be achieved was not sufficient to verify compression, however; valve action was verified at the No. 6 cylinder rocker arms, confirming crankshaft and camshaft continuity. Borescope examination of each cylinder did not reveal any anomalies that would have prevented normal operation. Both magnetos were separated from the engine. One magneto was located in the debris field but was broken and its operation could not be verified. The second magneto was not observed during the on-scene examination.

The propeller hub and one blade were located during the on-scene examination. The blade was still retained in the hub and exhibited signatures consistent with engine power production at impact. The second blade was located by the recovery company during retrieval after the onscene examination was completed and exhibited similar damage as the other blade.

Cessna 182F Skylane, N3192U, accident occurred on September 22, 2025, near near Williamsburg, Virginia

  • Location: Williamsburg, VA 
  • Accident Number: ERA25LA362 
  • Date & Time: September 22, 2025, 17:30 Local 
  • Registration: N3192U 
  • Aircraft: Cessna 182F 
  • Injuries: 1 Minor
  • Flight Conducted Under: Part 91: General aviation - Personal

https://data.ntsb.gov/carol-repgen/api/Aviation/ReportMain/GenerateNewestReport/201069/pdf

https://registry.faa.gov/AircraftInquiry/Search/NNumberResult?nNumberTxt=N3192U

On September 22, 2025, about 1730 eastern daylight time, a Cessna 182F, N3192U, was substantially damaged when it was involved in an accident near Williamsburg, Virginia. The airline transport pilot sustained minor injuries. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

The pilot reported that, shortly after departure from Waltrip Williamsburg Executive Airport (JGG), Williamsburg, Virginia while operating at 2,000 ft mean sea level, the engine “stumbled” and lost all power. According to the pilot, he heard what sounded like a “crunching noise” that coincided with the loss of engine power. The pilot attempted to return to the departure airport but noted that the airplane was too far away to reach the runway. The pilot attempts to restore engine power were unsuccessful, and he performed a forced landing to a field.

The airplane touched down in a recently harvested corn field. The pilot was unable to stop the airplane before it overran the field, impacted a tree and flipped over. The impact resulted in substantial damage to the wings and fuselage; the right wing was impact separated mid span and there were numerous buckles in the airframe. The pilot reported that the airplane departed JGG with about 60 gallons of aviation fuel on board.

Initial examination of the engine at the accident site by a Federal Aviation Administration inspector revealed that the propeller could be rotated partially but was unable to complete a full 360° of rotation. There was oil on the underside of the engine compartment, but no oil was observed on the belly of the fuselage, and there was no visible damage to the engine.

The airplane was retained for further examination.